Beijing JiaAn Electronics Technology Co., Ltd.,
RF expert since 1994
Add to Cart
Cansec S1SPI-HA-A ST SPIRIT1QTR smart IoT Solution Low Power Sub-G wireless transmitter and receiver module
Parameter | Min | Typ | Max | Unit | |
Operating Voltage | 1.8 | - | 3.6 | V | |
Operating Temperature | -20 | - | +70 | ℃ | |
Current Consumption | Sleep Mode | - | - | 1 | uA |
Receive mode | - | 9.5 | 12 | mA | |
Transmit Mode | - | 44 | 47.5 | mA | |
TX Power (For Carrier) | - | - | 14 | dBm | |
RX Sensitivity (For Lora Modulation) | - | - | -118 | dBm | |
Distance | HA:110 UA:230 | m | |||
Parameter | Min | Typ | Max | Unit | |
Operating Voltage | 1.8 | - | 3.6 | V | |
Operating Temperature | -20 | - | +70 | ℃ | |
Current Consumption | Sleep Mode | - | - | 1 | uA |
Receive mode | - | 9.6 | 10 | mA | |
Transmit Mode | - | 49 | 57 | mA | |
TX Power (For Carrier) | - | - | 14 | dBm | |
RX Sensitivity (For Lora Modulation) | - | - | -118 | dBm | |
Distance | HA:110 UA:230 | m | |||
Cansec S1SPI-HA-A ST SPIRIT1QTR smart IoT Solution Low Power Sub-G wireless transmitter and receiver module
S1SPI-HA/UA/NA-A Module is designed based on Spirit1. The Spirit1 is a very low-power RF transceiver, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate both in the license-free ISM and SRD frequency bands at 169, 315, 433, 868, and 915 MHz, but can also be programmed to operate at other additional frequencies in the 300-348 MHz, 387-470MHz, and 779-956 MHz bands. The air data rate is programmable from1 to 500 kbps, and the Spirit1 can be used in systems with channel spacing of 12.5/25 kHz, complying with the EN 300 220 standard. It uses a very small number of discrete external components and integrates a configurable baseband modem, which supports data management, modulation, and demodulation. The data management handles the data in the proprietary fully programmable packet format also allows the M-Bus standard compliance format (all performance classes). However, Spirit-1 can perform cyclic redundancy checks on the data as well as FEC encoding/decoding on the packets. The Spirit1 provides an optional automatic acknowledgement, retransmission, and timeout protocol engine in order to reduce overall system costs by handling all the high-speed link-layer operations.
Applications
Recommanded usage:
- AMR (automatic meter reading)
- Home and building automation
- WSN (wireless sensors network)
- Industrial monitoring and control
- Wireless fire and security alarm systems
- Point-to-point wireless link
Cansec S1SPI-HA-A ST SPIRIT1QTR smart IoT Solution Low Power Sub-G wireless transmitter and receiver module
Antenna Length
| XXX (MHz) | S1SPI-HA-A-XXX | S1SPI-HA-C-XXX (868/915) |
| L (mm) | L (mm) | |
| 434 | 21 | -- |
| 868 | 8.5 | 25 |
| 915 | 8 | 24 |
Cansec S1SPI-HA-A ST SPIRIT1QTR smart IoT Solution Low Power Sub-G wireless transmitter and receiver module